Automatic Screwdriver for Lightweight Robots
The RSX was developed for robot use and is suitable for lightweight robots from 3 kg due to its very low weight. The screwdriving unit is ESD conductive according to DIN EN 61340-5-1.
This makes the RSX also suitable for applications in electrical and electronic engineering. The connecting element is fed by hose. Alternatively, a Pick & Place solution is offered.
A fixing device for the fastener has been integrated for driving in all positions without holding air. Suitable adapters are available for all common robot models. Nuts and other connecting elements can also be fastened with the RSX.
The unit can be equipped with a vacuum module for difficult-to-access screw locations.
Technical Data
RSX | |
Screw size | M2 – M8* |
Nut size | M2 – M8* |
Weight (without drive) | approx. 1.9 kg |
Torque | up to 16 Nm |
Pressing force tool stroke | 10-70N |
Noise level measurement | approx. 50 dBA |
Cycle time | from 0.8 sec |
Vacuum version | yes |
Bit change | downward, < 10 sec. |
Length (without drive) | approx. 400mm |
*Standard, other values possible.