Dixon Transfer Escapements
Dixon’s Model ES-16 and ES-48 Transfer Escapements are available off the shelf with blank tooling. These Escapements can
be tooled to escape and transfer piece parts from a feed track to a placement device or holding fixture. Both Models are
actuated by a pneumatic cylinder and can be purchased for either left or right hand applications.
Dixon Model ES-16
Transfer Escapement
Ideal for applications requiring the escapement to retract out from under a placement head. The escapement tooling cams up
and over the piece part on the back stroke. This model is available with a 2-inch (50.8mm) or a 3-inch (76.2mm) stroke.
The blank front and rear escapement fingers must be configured to suit the piece parts being escaped.
Dixon Model ES-48
Transfer Escapement
Used for applications where piece parts feed up to a positive detented position. The rammer tooling is lifted on the
return stroke enabling piece parts in the track time to move forward. This model is available with 2-inch (50.8mm),
2.5-inch (63.5mm), 3-inch (76.2mm), 3.5-inch (88.9mm) and 4-inch (101.6mm) stroke. The blank front and rear escapement
fingers must be configured to suit the piece parts being escaped.
ITAR Compliant; ISO 9001:2000 with Design