Model SD-122 Horizontal Screwdriver

The Model SD-122 Screw/Nut Driver is ideally suited for automatic applications where the fastener needs to be driven horizontally into a piecepart. The driving head can also be mounted at a specific angle if required. The driver is fully automatic and equipped with a vibratory feeder bowl system. Several methods may be used to convey the fasteners from the feeder bowl to the transfer escapement: an inclined steel track or a gravity or blow fed tube. The transfer escapement places each fastener into the placement jaws of the driving head. The placement jaws hold the fastener’s shank in position until the fastener is engaged in the workpiece. The driving head has built-in sensing to confirm proper insertion of each fastener into the workpiece. The baseplate size is determined by the size of the feeder bowl system. The driving head can provide wide range of driving speeds and torque capacities using either pneumatic or DC electric motors. Each head can be equipped to drive fasteners to a Torque or Depth setting.

Request a Quote Download Product PDF

Feed System Information
Feed System Vibratory Feeder Bowl
Bowl Size 228.6 – 914.4 mm
(9 – 36 in.)
Track Inline Gravity Fed Track, Vibratory Inline Fed or Drop Tube
Escapement Mechanically Linked Standard
Optional Air Escapement
Piece Part Information
SD-122 Style Incline Gravity Vibratory Inline Drop Tube
Shank Diameter 2.84mm – 6.35mm
(.112 in. – .250 in.)
Max 25.4mm
(1.0 in.)
2.2mm – 22mm
(0.08 in. – 0.87 in.)
Shank Length Max 25.4mm
(1.0 in.)
Max 50.8mm
(2.0 in.)
Max 50.8mm
(2.0 in.)
Head Diameters Max 14mm
(.56 in.)
  50.8mm
(2.0 in.)
Contains all options from base head
100 Series Screw/Nut Driving Head