Part Placers- Auto-fed Part Placers
Dixon Automatic Tool, Inc. - World Class Automated Assembly Solutions & Equipment
Home > Products > Part Placers
|
Dixon's Product Group offers a number of standard and custom auto-fed part placers, including special pick & place part placing stations. Feed systems may vary with each part placer, due to the piece part size, weight, and geometry. Piece parts may be conveyed from the vibratory feed system to the placement head by hardened feed tracks, blow tube, or a magazine-type drop tube. All placement heads have sensing features that provide confirmation of proper placement of each piece part in the assembly process. Interlocking controls are selected to meet the requirements of each assembly application.
| Light Tools |
 |
Dixon provides the automation industry with electric AC and DC handheld drivers that are fully automatic. Fully automatic drivers are preferred because the motor turns off when the clutch disengages. This functionality saves...
More Info... |
| PLC Access Modem |
 |
Dixon's PLC Access® Modem is a remote access device enabling connections to different model Programmable Logic Controllers (PLC) used in various industries. The Dixon PLC Access® Modem enables a remote technician to...
More Info... |
|
| Track-Fed Part Placers |
 |
Dixon's Product Group Track-Fed Part Placers can be tooled to feed, orient, and accurately place a wide range of piece parts in an automated process. Cycle rates up to 80 placements per minute are obtainable. Placing heads are available with standard placement strokes up to 5 inches (127mm) with our AP-100 Series Part Placers.
|
- Piece Parts .56 in (14mm) diameter x 1.0 in (25.4mm) long
- Press force up to 40 lbs (178 N) standard, optional press force up to 185 lbs (823 N)
- Uses Place Perfect® technology
|
|
|
|
| Drop Tube Fed Part Placers |
 |
AP-120 Drop Tube Fed Parts Placers are designed to provide higher production rates than a basic pick & place model. Placement rates up to 80 per minute are obtainable. A shuttle type escapement on the Model AP-120 assures positive insertion of each piece part into the placement jaws. Each piece part is properly placed (or pressed) into the workpiece with verification sensing.
|
- Piece Parts .50 in (12.7mm) diameter x 2.0 in (50.8mm) long
- Press force up to 40 lbs (178 N) standard, optional press force up to 185 lbs (823 N)
- Uses Place Perfect® technology
|
|
|
|
| Blow-Fed Part Placers |
|
Dixon's Model AP-1000 Blow-Fed Part Placer/Press can be tooled to place and press cylindrical piece parts up to .59 inches (15mm), and up to 4.5 inches (114mm) in length. The Model AP-1000 has a standard stroke of 6 inches (152mm), and a pressing force of 1000 pounds (450KN). Can be purchased with or without a feed system for the piece parts.
|
- Standard Placing Stroke of 6 in (152mm)
- Variety of Feeding Options
- Uses Place Perfect® technology
|
|
|
|
|
| Pick And Place Units |
|
Dixon Pick & Place Stations are custom designed with a wide selection of horizontal and vertical strokes. Cycle rates are determined by the stroke length requirements.
|
- High cycle rates
- Precise repeatability
- Compact design
- Easy to apply
- Uses Place Perfect® technology
|
|
|
|
|
|
| Blow-Fed Nail Placing Units |
|
Dixon's AP-2000 blow-fed nail placement head can be purchased complete with a feed system or separately.
|
- Flexible tooling for various nail lengths
- 35 - 100mm Jaw Stroke
- 150 - 280mm Punch Stroke
- Up to 900 lbs (4.0 kN) force depending on product configuration
- Uses Place Perfect® technology
|
|
|
|
|
|
|
|
May 15, 2008
| Robotic Application |
 |
Dixon provides a low-cost, highly flexible and productive method to place pal nuts into automotive instrument panels. |
| More Information ... |
| Long Bolt Application |
 |
DT selected Dixon Automatic Tool, Inc. as their partner to supply the auto-fed screwdriving stations for their long bolt driving application. |
| More Information ... |
| Trademarks |
Assemble Perfect®
Drive Perfect®
Torque Perfect®
Place Perfect®
Press Perfect®
Perfect Solutions®
|
|
